Clamp.

See you later, alligator...

See you later, alligator.

clamp to ground

The alligator ate the dog.

Dam and clamp installed?

R2, release the docking clamp.

The ropes were suddenly off the alligator.

Couldn't you just use a clamp?

A wise businessman knows how to clamp down on costs.

In order to clamp in the desired center of stroke

This is only the beginning of a total clamp down.

And I actually made up a little character whose name was Mr. Alligator.

But you clamp this thing on my head, and something happens.

And I would pack a little bag and wait for Mr. Alligator to come.

An alligator stuff'd, and other skins Of ill shaped fishes and about his shelves

Always be sure to clamp with the jaws against the boring ring

When we clamp this accurately machined slug at 300 psi and check for deflection

Again we clamp the machined slug at 300 psi and although you might think

Now, Mr. Alligator never did come, but the idea of Mr. Alligator coming actually saved my sanity and made it OK for me to keep going, because I believed, in the distance, there would be someone coming to rescue me.

We clamp it at the center of the jaws leaving adequate clearance for the cutting path

Connecting the 1 2 hose directly to the hose barb, with a hose clamp, is preferred

Aluminum jaws are typically used to grip light weight or hollow parts where clamp force is low

Keep in mind that there are many situations where you will need to clamp your work piece

We need to clamp OD gripping jaws to just slightly smaller than the work piece outer diameter

When we clamp the demonstration work piece at a pressure of 400 psi, jaw deflection becomes significant

For example, in New Orleans we have Cajun Chinese food, where they serve Sichuan alligator and sweet and sour crawfish.

And it hit me in that moment that it had taken 47 years, but that Mr. Alligator had finally shown up.

It is recommended that the 1 2 hose is connected directly to the Hose Barb with a Hose Clamp

During jaw cutting, clamp the jaws with a force as close as possible to your planned part gripping force

We will use our part to set the initial position of the jaws as they clamp the boring ring

At 250 psi clamp pressure, our part's total indicated run out using the pie jaws is five thousandths (0.005 , 0.127 mm)

So to kind of, I guess, clamp down on things, in April of 1792, the National Assembly created the Committee of

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

If your leg is chopped off and you lose blood, your body will clamp down, increase the heart rate, do everything it can to keep your blood pressure up.

But the intention the entire time was, when they have the upper hand, to actually clamp down, reinstate slavery, and take away the civil rights of the freemen of color.

So you can take a bacteria that really doesn't make these things at all, and if you could clamp these on it really well you have it taken off the street.