In a standard CNC program

And (Drilling noise) (Laughter)

It's a scientific drilling vessel.

My point is that this is not oil drilling.

The part program is just ending a drilling operation

Now on the left hand pane, I see the CNC program

The next time I run the CNC program all the way through

Who doesn't always know a great deal about the complex CNC control

We've been through this before with other ways of offshore drilling.

longwall mining, fracking, tar sands, tar shale, deep ocean Arctic drilling.

Formations, like these require long hours of intensive drilling and careful judgement.

It was the greed and recklessness that led to the drilling explosion.

I can incorporate those changes back into the CNC program using the optimizer window

And then that has to do a lot with like CNC machining, you know.

Do you know if anybody's doing any drilling or blasting or anything like that?

Now that I've defined my group, it's time to incorporate this group into my CNC program

The CNC control is always going to load the corresponding length, diameter, and P COOL offsets

When I'm running a CNC program I'm really only interested in displaying the offsets that are active

Why are we drilling for more oil, when it's polluting the atmosphere and causing oil spills?

The CNC control will read the T1023 command and will look next to the advanced tool management page

We stopped drilling in ANWR, but we didn't actually reduce the amount of oil that we consumed.

And so what we did was, actually, we made moratoriums on the east and west coasts on drilling.

In this video, we will show you how to use the automatic tool presetter option for Haas CNC turning centers

And what we found after drilling back in time two to 400 years was that these were unique events.

These changes are captured on the fly and I can come back at the end and incorporate them in the CNC program

And here, scientists are drilling into the past of our planet to find clues to the future of climate change.

long distance drilling core into the center of rock that we bring up and there's bacteria in the pores of that rock.

So that means drilling for oil in the deepest water, including the icy Arctic seas, where a clean up may simply be impossible.

And the catheters they shoved into me without proper medication made me scream out the way the Earth cries out from the drilling.

This is a crazy thing, this big drill rig wrapped in a blanket to keep everybody warm, drilling at temperatures of minus 40.

The Haas control is capable of holding 200 tool offsets and 105 work offsets but the typical CNC program isn't going to use all of them

We use CNC to make scaffolding to train semi epithetic matter, plants, into a specific geometry that makes a home that we call a Fab Tree Hab.

Oftentimes I write a CNC program at my desk and I bring it down to the machine to debug the program while I set up the first part

So that trip just ended, and I can't show you too many results from that right now, but we'll go back one more year, to another drilling expedition I've been involved in.

Then, I started drilling down, thinking about the computations I might want to do, trying to figure out what primitives they could be built up from and how they could be automated as much as possible.

If we made all of our autos this way, it would save oil equivalent to finding one and a half Saudi Arabias, or half an OPEC, by drilling in the Detroit formation, a very prospective play.

But even more striking than the ferocious power emanating from that well was the recklessness with which that power was unleashed the carelessness, the lack of planning that characterized the operation from drilling to clean up.

Because you've got to include the man who grew the coffee, which was brewed for the man who was on the oil rig, who was drilling for oil, which was going to be made into the plastic, etc.

With scientists around the world, I've been looking at the 99 percent of the ocean that is open to fishing and mining, and drilling, and dumping, and whatever to search out hope spots, and try to find ways to give them and us a secure future.

What we decided was that the way to address it is not to kill the children by drilling them on, you know, very flat kind of learning, you know, skill and drill, but to really look at the whole child and give them what you would find in, say, a private school.

You can go to an investment bank right now and you can say I want to build and oil drilling platform and it's going to cost 12 billion dollars, and they will write you a check for that because you can go and say, I've built 50 of these platforms before, here's about where the price came out.

I should also note that the discretionary spending, which is about 19 percent of the budget, that is Democratic and Republican issues, so you do have welfare, food stamps, other programs that tend to be popular among Democrats, but you also have the farm bill and all sorts of Department of Interior inducements for oil drilling and other things, which tend to be popular among Republicans.