Anyway, factory tooling.

In a standard CNC program

Tooling sometimes has a habit of disappearing at inopportune moments

Now on the left hand pane, I see the CNC program

The next time I run the CNC program all the way through

Who doesn't always know a great deal about the complex CNC control

If I want to use backup tooling I simply replace the T23 with T1023

In a few simple steps I have incorporated redundant tooling into my program xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I can incorporate those changes back into the CNC program using the optimizer window

And then that has to do a lot with like CNC machining, you know.

With most machine tools, defining, calling, and managing backup tooling is complicated and time consuming

Place a tooling ball, mounted to a magnetic base near the outside edge of the table

Now that I've defined my group, it's time to incorporate this group into my CNC program

The CNC control is always going to load the corresponding length, diameter, and P COOL offsets

When I'm running a CNC program I'm really only interested in displaying the offsets that are active

The CNC control will read the T1023 command and will look next to the advanced tool management page

I thought, Finally, oh yeah great, big company, I'm gonna work with somebody with money for tooling and molding.

If Bennington keeps tooling up for his 1940 Plymouth version he's building, it'll cost millions for us to retool.

In this video, we will show you how to use the automatic tool presetter option for Haas CNC turning centers

These changes are captured on the fly and I can come back at the end and incorporate them in the CNC program

Handle jog the probe tip to a position one tenth of an inch (1 10 or 2.54mm) above and centered over the tooling ball

The Haas control is capable of holding 200 tool offsets and 105 work offsets but the typical CNC program isn't going to use all of them

We use CNC to make scaffolding to train semi epithetic matter, plants, into a specific geometry that makes a home that we call a Fab Tree Hab.

The probe will check the tooling ball at C axis positions of zero, ninety, one hundred eighty, and two hundred seventy degrees (0 , 90 , 180 , 270 ) of rotation

Oftentimes I write a CNC program at my desk and I bring it down to the machine to debug the program while I set up the first part

The Zero All Axes option is not available on DS 30 Machines in order to decrease the chances of crashing Axes which are close together and holding complex tooling

So the problem became and they set this dilemma to me that you have to design the interior using only our existing technology, and there's no money for tooling or molding.

Now, my obsession ended up driving me to create full size prototypes in my own backyard (Laughter) and actually spending my own personal savings on everything from tooling to patents and a variety of other costs, but in the end I ended up with this modular housing system that can react to any situation or disaster.