I understand that but but if you think about epoxy, what's epoxy?

It works because it's non conductive.

Anything in the world is either conductive or not conductive, and you can use those together.

The metal in the sink is conductive.

It's a thousand times more conductive than copper.

A conductive pen from the Lewis lab at UlUC.

And I call it an epoxy method because it's not very appetizing.

And on day two, we put those two pieces together. That's the epoxy.

It doesn't require any scalp preparation, no conductive gel or paste.

Conductive gel to prevent the electrical current from setting him on fire.

And you can see just what a shoestring operation this really was, because we cast these 16 blue LEDs in epoxy and you can see in the epoxy mold that we used, the word Ziploc is still visible.

So conductive ink allows us to paint circuits instead of using the traditional printed circuit boards or wires.

Here's another kind of prefiguring of epoxy because we've got glutenin and gliadin, neither of which are strong enough to make a good bread.

Two scientists at University of illinois understood this when they published a paper on a simpler method for making conductive ink.

Say, Then bring a scripture from God, more conductive to guidance than both, and I will follow it, if you are truthful.

Hannah created a series of paper speakers out of a wide range of materials from simple copper tape to conductive fabric and ink.

Okay, so to the mediation analysis, as I said, it is typically conductive when we know we have a correlation between x and y.

Conductive ink has been used by artists, but recent developments indicate that we will soon be able to use it in laser printers and pens.

A technician will put the electrodes onto the scalp using a conductive gel or paste and usually after a procedure of preparing the scalp by light abrasion.

This is a wheat bread, a whole wheat bread, and it's made with a new technique that I've been playing around with, and developing and writing about which, for lack of a better name, we call the epoxy method.

When I spoke to some printers when I started doing this and told them what I wanted to do, which was to print conductive inks onto paper, they told me it couldn't be done, again, that kind of favorite thing.

So what we do is we take conventional printing presses, we make conductive inks, and run those through a press, and basically just letting hundreds of thousands of electrons flow through pieces of paper so we can make that paper interactive.

So we have a piece of paper with conductive ink on, and then add onto that a small circuit board with a couple of chips, one to run some capacitive touch software, so we know where we've touched it, and the other to run, quite often, some wireless software so the piece of paper can connect.