Heating Coil

He gets finned, and then he gets thrown overboard.

Built the Tesla coil.

You've got a coil.

Giant serpent, curl and coil!

I cut off one coil.

And it's not a tesla coil.

If you put a coil around it,

I'd have to reconfigure the coil assembly.

When we have shuffled off this mortal coil...

When a coil is moved near to a wire with current flowing in it current flows in the coil as well.

JULlET Here's such a coil! come, what says Romeo?

What I need to do is wind a coil.

Whenever current flows through the coil, this becomes an electromagnet.

The primary phase coil is fused. It'll take several hours to repair it.

Because I want to get my coil to have about 4 ohms of resistance.

And I'm going to center that coil right over those magnets so it's just above it.

That coil is connected to an R.F. amplifier that creates a high frequency oscillating magnetic field.

In the canal, which is just outside the restaurant, there is hundreds of meters of coil piping.

Imagine a coil. For those of you that are engineers, there's a capacitor attached to it too.

They're going to survive as long as our species survives on what Shakespeare called this mortal coil.

You coil it around so that you get 1s and 2s and 3s on the outside, like

And what I'm going to do is take this wire and wind an entire voice coil from it.

This is a 100,000 volt Tesla coil that I built in my bedroom, much to the dismay of my mother.

The four things that I need to make my own speaker is a diaphragm, a coil, a support, and a magnet.

like a generator, as our system is dynamic, dynamic magnetic fields, in cutting the atoms of the copper winding of the coil, it creates energy.

The last inhabitant of these woods before me was an Irishman, Hugh Quoil (if I have spelt his name with coil enough), who occupied Wyman's tenement Col.

And if you can cause that coil to resonate, what will happen is it will pulse at alternating current frequencies at a fairly high frequency, by the way.

Heating coils are used to heat flasks and other containers. Multiple heating coils can be connected with a thermometer so that the heat will not exceed a specified temperature. It is possible to use a magnetic field inside the heating coil to stir fluids with a magnetic stirrer. This will homogenize the fluid in terms of temperature and composition.

And we make a mathematical model of those relationships and program them into a tablet computer so that when you take the stylus and go and touch the screen, that voice coil actuator in the white bracket plays vibrations to give you the illusion that you're touching the real surface, just like if you touched, dragged back and forth, on the real canvas.