Translation of "spindle speed range" to Japanese language:
Dictionary English-Japanese
Examples (External sources, not reviewed)
| Remember, spindle speed also affects outside diameter holding force | 遠心力は仕事の部分から顎を引っ張るし スピンドル速度の向上とグリップ力を低減 |
| And we'll keep the spindle speed below the recommended 900 rpm | 同様に我々 はとき OD グリップ |
| Along the bottom, we have the spindle information box with the override values for spindle speed, feed rate, and rapid rate | 主軸回転速度 送り速度 急速なペースのオーバーライド値 演算子 仕事オフセット マシン および距離に行くの座標を示す 位置 ボックスの横には |
| If your program spindle speed does exceed 750rpm, the program will not run | キーのスイッチ セットアップでまだモードと演算子ドア締め切りました |
| The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface | 旅行の主軸頭 z 軸の中央に移動します |
| However, rapid axis movement is automatically limited to 25 of maximum and the command spindle speed in your program may not exceed 750rpm | 750 rpm プログラムでコマンドのスピンドル速度を超えることはできません あなたのプログラムのスピンドル速度 750 回転数を超えると プログラムは実行されません |
| If the doors are opened while the machine is running all axis motion will stop and the spindle speed will drop to 750rpm maximum | すべての軸の動きを停止し 主軸回転速度最大 750 rpm にドロップします プログラムの実行を続行する場合は |
| Place the work probe in the spindle | すべての軸は 0 を返します |
| Attach the magnetic base to the spindle | 10 250 Mm の直径サークルを測定するテスト インジケーターの位置 |
| Range | レンジ |
| Range... | レンジ |
| Range | レンジ |
| Range | 範囲 |
| Range | 範囲 |
| McMillan TAC .50 Sniper Rifle Range Far a projectile leaving the barrel at a speed of 2,700 m s | 2700メートル sの速度でバレルを残して発射 パワーと精度の組み合わせ |
| The spindle warm up should now be complete | マシンを実行する準備が整いました |
| Attach the magnetic base to the spindle nose | テーブルの中心に 10 インチ 10 または 250 mm の直径の円を測定するテスト インジケーターを位置します |
| During automatic recovery, the spindle drawbar unclamps and you will hear a blast of air coming from the spindle nose | 空気から主軸のブラストを聞くでしょう ツール変更腕が逆方向に回転します |
| They're out of range. Range is good. | よし |
| Speed | 速度制限 |
| Speed | スピード |
| Speed | 速さ |
| Speed | 速度 |
| Speed | 速度 |
| Speed? | 速度は |
| Custom Range | カスタムフォントstart of sequence number range |
| Range Corrected | レンジ補正 |
| Display Range | 表示レンジ |
| Plot range | プロット範囲 |
| Plot Range | プロット範囲 |
| Plotting Range | プロット範囲 |
| Range error | 範囲エラー |
| Date Range | 日付範囲 |
| Scheduling Range | スケジュールの範囲 |
| Width range | 距離範囲 |
| Color Range | 色の範囲 |
| Distance range | 距離範囲 |
| Width range | 距離範囲 |
| Cell range | セルの範囲 |
| Check range | 評価範囲 |
| Sum range | 合計範囲 |
| outside range | 範囲外 |
| Print range | 印刷範囲 |
| Range 014. | 目標 014 |
| Regardless of which tool ends up in the spindle | CNC 制御が常にロードになる |
Related searches : Spindle Speed - Spindle Range - High Speed Spindle - Spindle Rotation Speed - Speed Range - Speed Control Range - Full Speed Range - Low Speed Range - Operating Speed Range - Wide Speed Range - Idle Speed Range - Engine Speed Range - Spindle Drive