torque

torque variance

Holy Jesus. Torque.

Torque it down.

A phillips screwdriver and a voltage sensing screwdriver or volt meter

Sonic screwdriver. Use it!

Oh,wait,I see it. I see it,I see it. Screwdriver,screwdriver.

Could I have a screwdriver?

Anybody with a screwdriver can.

You need a Robertson screwdriver.

Individual torque converters. You're crazy!

It's got safety features, torque converters on every wheel... double torque converters won't work.

Torque that acts upon the body

Tone it down with the torque.

Where've you stuck my flat head screwdriver?!

Now, doesn't that just torque your jaws?

Value of the torque, acting on the body

I borrowed the screwdriver from a friend of mine.

This screwdriver is too small to be any use.

Circular motor applies a constant torque to the body

Do you happen to have a nail or a screwdriver?

Use a 'phillps screwdriver to adjust the lamp positions as necessary

And refer to the chuck documentation for the correct torque value

When attaching the uncut jaws to the chuck always torque the jaws in place

Use a smaller torque value for aluminum jaws to avoid distorting the screw seats

I used a screwdriver to turn the screw, but it just didn't want to turn.

Did any of you have to fix it with like a screwdriver or duct tape?

I loaded the wrong program. The hand thinks it's holding a screwdriver in outer space.

But I had a screwdriver in my bag (laugh) screwdrivers, a soldering iron...stuff like that.

The high pressure turbine is making about two thirds of the torque that's turning the shaft.

And all of these things combine to create an enormous amount of torque on the planet.

You know, it's a spatula, it's a pry bar, it's a screwdriver and it's a blade, yeah.

And the low pressure turbines are making about one third of the torque that's turning the shaft.

In our case, Andrew will torque the M12 bolts holding these steel jaws to 80 foot pounds

And not only that, the brain is profoundly asymmetric. Drawing of the brain, Yakovlevian torque brain viewed from below

No, we can modify the workbench maybe to put a special stool, a special anvil, special vice, and maybe an electric screwdriver.

Imagine that someone is teaching you how to be a carpenter and they say here's a hammer, here's a screwdriver, here's a saw, good luck.

And if you want to go faster, say on pavement, you can shift to a high gear, and you get less torque, but higher speeds.

Instead of modeling the set point, we have a secondary controller that understands how much torque it takes to turn a steering wheel and uses that as its information.

And if we cannot figure out a way to deal with that torque, we are going to find ourselves more and more and more quickly facing situations which are simply unthinkable.

And so it's not going to break very easily, but if it does, virtually every piece in this machine can be swapped out and replaced with a hex wrench and a screwdriver.

An approximation of the rules used in Daleks, a robots like game for early Apple computers. The hero is allotted one energy each round that can be used to power the sonic screwdriver. All other special features are disabled.

But what I like about this is, it boils down to someone on the street with a small, flat surface, a screwdriver, a toothbrush for cleaning the contact heads because they often get dust on the contact heads and knowledge.

It's also about 40 percent more efficient than a regular wheelchair, and because of the mechanical advantage you get from the levers, you can produce 50 percent higher torque and really muscle your way through the really, really rough terrain.

I immediately thought of a mountain bike, and a mountain bike's good at doing this because it has a gear train, and you can shift to a low gear if you have to climb a hill or go through mud or sand and you get a lot of torque but a low speed.